A relay is an electrically operated switch. They commonly use an electromagnet (coil) to operate their internal mechanical switching mechanism (contacts). When a relay contact is open, this will switch power ON for a circuit when the coil is activated.
The example relay diagrams below show how a relay works.
We stock a large range of relays & relay holders all available for purchase directly from our website.
Relays allow a low current circuit to control one or more higher current circuits. Relays provide these benefits;
1. Thinner cables can be used to connect the control switch to the relay thereby saving weight, space and cost.
2. Relays allow power to be routed to a device over the shortest distance, thereby reducing voltage loss.
3. Heavy gauge cable only needs to be used to connect a power source (via the relay) to the device.
There are several benefits of using a relay in a car. Firstly using a relay means the switching circuit does not require a high current rated switch or cable which reduces cost and weight. Secondly, relays can be positioned anywhere in the vehicle to provide efficient power transfer to the electrical accessory you are controlling. Relays are perfect for controlling many circuits in a car like headlights, electric motors, heater etc.
Basic relays feature electrical ratings for both the coil and the internal switching contacts. The coil voltage rating is the voltage required for the coil to operate correctly. The switching circuit of the relay also features a voltage and ampere rating. This is the maximum rating of the switch contacts and should NOT be exceeded. Double throw relays often have 2 x switch electrical specifications. One for the normally open terminal, the other for the normally closed terminal. ie. N/O: 35A at 14vdc, N/C: 20A at 14Vdc.
Relays can produce a large voltage spike when they are switched off due to the coil de-energising. Resistors or diodes are sometimes fitted across the coil of the relay to stop/reduce these spikes travelling back into the control circuit and damaging sensitive components. Resistors are more durable than diodes, but not quite as efficient at eliminating voltage spikes. You need to assess the sensitivity of the components in the control circuit when deciding if / what type of protection is required.
The difference between a 4 and 5 pin relay is that a 4 pin relay is used to control a single circuit, whereas a 5 pin relay switches power between two circuits.
4 Pin Relay
4 pin relays use 2 pins (85 & 86) to control the coil and 2 pins (30 & 87) which switch power on a single circuit. There are 2 types of 4 pin relay available; normally open or normally closed. A normally open relay will switch power ON for a circuit when the coil is activated. A normally closed relay will switch power OFF for a circuit when the coil is activated.
5 Pin Relay
5 pin relays provide 2 pins (85 & 86) to control the coil and 3 pins (30, 87 & 87A) which switch power between two circuits. They have both normally open and normally closed connection pins. When the coil is activated, power will be switched from the normally closed pin to the normally open pin.
ISO relays are designed for use in the automotive industry and adhere to a standard pattern for their electrical terminals. The newer ISO 280 relays use a smaller pin terminal that is 2.8mm wide and can be used in compact power distribution units and holders.
We sell both 4 pin normally open (SPST) and 5 pin change-over (SPDT) relays with resistor protection in either 12V or 24V ratings. Should you require diode protection, please contact sales.